The MXHF-1500RF is a R/F Diagnostic table which offers full patient support for all radiographic and fluoroscopic procedures from 90 degree vertical through 15 degree trendelenberg with an automatic stop at the horizontal position.
The table is 85cm height 213cm long flat tabletop, slides 50cm toward to the head end and the foot end. The table is fully integrated and coupled to spot-film support tower which allows maximum patient accessibility in cross table examinations. Moreover, the spot-film device designed can be slided parking around the tabletop surface so that the tabletop in free of obstacles.
The followings are included as standard components.

• The fluoroscopic carriage includes vertical carriage and vertical tower, which supports the spot-film device, as a counterbalanced assembly.
• Bucky device with cassette tray.
• Motor driven under table collimator.
• Hand grips.
• Foot rest.

FEATURES

• Constant potential high frequency, pulse width modulated
• Exposure times as short as 1 msec, 0.10 mAs for pediatrics
• Pulsed fluoroscopy, variable rate optional
• Closed loop control of mA and kVp maintains accuracy
• Integrated high speed rotor control
• Pre-programmed protection for any x-ray tube
• Integrated service mode assists in calibration
• Self-diagnostics circuitry with error code reporting for fast trouble shooting
• Automatic line voltage compensation
• Meets EMI/EMC requirements
• One years warranty maintenance
• Optional power storage unit with batteries slows generator at 30kW or 50kW from standard nominal 110/220/240VAC, 50/60 Hz, 15/10Amp. Outlets
• Precludes the need for costly electrical installations

Electro Medical
The MXHF-1500R is a single phase, full wave rectification X-ray generator combined with control console and high tension transformer. This compact generator provides operator & patients with optimal radiographic result. Also, it can be combination with any radiographic apparatus such as diagnostic table, tube stand and wall Bucky stand in wide range.

FEATURES

• Constant potential high frequency, pulse width modulated
• Exposure times as short as 1 msec, 0.10 mAs for pediatrics
• Pulsed fluoroscopy, variable rate optional
• Closed loop control of mA and kVp maintains accuracy
• Integrated high speed rotor control
• Pre-programmed protection for any x-ray tube
• Integrated service mode assists in calibration
• Self-diagnostics circuitry with error code reporting for fast trouble shooting.
• Automatic line voltage compensation
• Meets EMI/EMC requirements
• One years warranty maintenance
• Optional power storage unit with batteries allows generator at 30kW or 50kW from standard nominal 110/220/240VAC, 50/60 Hz, 15/10Amp. Outlets
• Precludes the need for costly electrical installations

The mobile combines the technology of one of the world’s highest-performance high-frequency generator, with a range of facilities usually unavailable.
This model is a mobile x-ray system with a maximum power of 32kW, compact, and very low weight.
Due to the frequency generator and use of the latest microprocessor technique, the system keep up very high stability and accuracy for a variety of radiographic condition.
This mobile type X-ray unit enables you to perform radiography whenever you want in a hospital or clinic.

FEATURES

The MXHF-1300RM mobile type unit consists of the following parts.

• X-ray control console [MXCHF-1300RM]………………….1 set
• High voltage generator [MXHHF-1300RM]……………….1 set
• X-ray tube housing assembly……………………………….1 set
• X-ray beam limiting device [MCM-90 1R]………………...1 set
• Mobile cart [MTM-203M]………………………………….1 set
• X-ray tube support [MSM-303M]…………………………..1 set
• High voltage cable [HVC-2.5]………………………………1 set

The MXHF-1200R is a single phase, full-wave X-ray generator with operating control and high tension transformer.

The generator is a solid state design, compact size heavy use rated components make it an optimized general purpose radiographic power source for hospital, clinic and private practice application.

A radiographic type of diagnostic table, tube stand and wall Bucky stand.

FEATURES

• Constant potential high frequency, pulse width modulated
• Exposure times as short as 1 msec, 0.10 mAs for pediatrics
• Pulsed fluoroscopy, variable rate optional
• Closed loop control of mA and kVp maintains accuracy
• Integrated high speed rotor control
• Pre-programmed protection for any x-ray tube
• Integrated service mode assists in calibration
• Self-diagnostics circuitry with error code reporting for fast trouble shooting
• Automatic line voltage compensation
• Meets EMI/EMC requirements
• One year warranty maintenance
• Optional power storage unit with batteries allows generator at 30kw or 50Kw from standard nominal 110/220/240VAC, 50/60 Hz, 15/10Amp. Outlets.
• Precludes the need for costly electrical installations



Client Area
Jobs
Contact Us









 
 





 





 





 







 
Powered by: EfroTech
    Copyright © 2006 Hospital Supply Corporation.
All rights reserved